// Apply for Financing // REQUEST EQUIPMENT QUOTE // LOGIN
Med One Group

Get started now

Asset Refresh Program

Restore facility owned beds & stretchers to like-new condition within weeks. Experience increased patient safety, cost savings, and more with the Med One Asset Refresh Program.

Before

After

Are your beds failing to meet current safety or hygiene standards?

Any breakdowns in bed frames, rails, or motors that pose safety risks?

If you answered yes to either of these questions the asset refresh program is for you.

How It Works

RECOVER

Work with a Med One Equipment Advisor to identify equipment recommended for the program.

RECONDITION

Med One will provide a loaner, pick up the bed or stretcher, and recondition the equipment within weeks.

REPURPOSE

Receive the asset back in like-new condition. The health system can then repurpose inventory as needed.

Benefits

PATIENT
SAFETY

INFECTION CONTROL
& PREVENTION

PATIENT
SATISFACTION

EMPLOYEE
SATISFACTION

SIGNIFICANT
COST SAVINGS

ASSET REFRESH PROGRAM
MULTI-STEP PROCESS

HOSPITAL BEDS

  1. Run serial number with OEM for necessary upgrades, recalls, and revisions
  2. Disassemble and disinfect all components
  3. Polish, replate, repaint, or replace all exterior components
  4. Inspect all working components for wear and replace defective parts
  5. Replace wheel and caster assembly
  6. Replace safety switches
  7. Replace lockout switches
  8. Replace foot pedals if necessary
  9. Inspect, clean, and lubricate head, knee, and high/low drive screws for reuse
  10. Inspect nurse control, high/low, and degree indicator panels
  11. Recalibrate the brake and steer system
  12. Reassemble refurbished components
  13. Inspect and lubricate all pivot points
  14. Inspect and lubricate instant CPR Cables and latch release (if applicable)
  15. Inspect and lubricate side rail latches
  16. Replace side rail plastics
  17. Replace the laminate in the headboard/footboard with the custom finish of the customer's choice
  18. Stage weight test weight tolerances and table movement through all available articulations
  19. Apply new decals and safety information

STRETCHERS

  1. Run serial number with OEM for necessary upgrades, recalls, and revisions
  2. Disassemble and disinfect all components
  3. Polish, replate, repaint, or replace all exterior components
  4. Inspect all working components for wear and replace defective parts
  5. Soak, degrease, clean, and lubricate wheel and caster assembly
  6. Replace foot pedals if necessary
  7. Sand, prime, and paint frame to meet new specifications
  8. Restore the stretcher base and lift system to original mechanical specifications
  9. Recalibrate the brake and steer system
  10. Reassemble refurbished components
  11. Inspect and lubricate all pivot points
  12. Inspect and lubricate instant CPR cables and latch release
  13. Inspect and lubricate side rail latches
  14. Apply new decals and safety information
  15. Stage test weight tolerances and table movement through all available articulations
  16. Apply new decals and safety information

BRANDS SUPPORTED: HILL-ROM, STRYKER, LINET, AND MORE

Get started now